Texas Instruments DLP3030-Q1, Руководство пользователя

Страница: 14 / 20

First Power Up
www.ti.com
14 DLPU065 – November 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
Getting Started
2.3 First Power Up
Instructions to Power on HUD Package
• Procure a 12-V (3-A) supply.
• Power off the supply.
• Install the banana connectors on the Power Input Cable into the power supply. The red cable goes to
the V+ terminal, and the black cable goes to the V– terminal.
• Power on the supply.
• Once the system is powered up, a green indicator light on the Formatter Board will illuminate, and the
computer will detect an additional display called DLP_WVGA. See
Figure 1-2 to locate the indicator
LED.
• If the PC is trying to duplicate the image on the EVM and the monitor, then the PC resolution can be
changed. To fix this, change the PC’s external monitor setting to "Extend."
– Press “W P” key combination, then select “Extend” as shown in Figure 2-8 .
Figure 2-8. PC Video Output Mode Configuration
• The EVM will now be displaying the video content.
Figure 2-9. Example of C-HUD Displaying Video Content
• For control options, like dimming the display or changing the input source settings, please reference
Section 2.4 to install the Cheetah USB to SPI Adapter and Automotive Control Program (ACP) Lite on
your computer.