Texas Instruments DLP3010, Руководство пользователя, Страница: 9 / 13

www.ti.com
EVM Setup
9 DLPU070B – July 2018 – Revised February 2019
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
DLP3010 Light Control EVM User’s Guide
8 EVM Setup
The DLP3010 Light Control EVM is composed of three parts:
• DLP3010 Light Control main board
• DLP3010 Light Control display board
• Engine with LED connection and flex cable
The main board contains the connector for the power supply, a USB connector to communicate to the
DLP3010 Light Control GUI, HDMI, audio, and the connector for the DLP3010 Light Control display board.
The main board also contains a switch to turn on the projector in case the DLP3010 Light Control display
board and the engine are connected.
Figure 5 shows the main connectors on the main board.
Figure 5. DLP3010 Light Control Main Board
The DLP3010 Light Control Display board has three main connectors: The LED connector, the flex cable
connector, and the main board connector. The main and display board connect together via J5 and J9.
Note that the main board connector J5 on the DLP3010 Light Control Display board is on the bottom,
while the LED and flex cable connectors are on the top as shown in
Figure 6 .