Texas Instruments DLP LightCrafter Display 3310, Руководство пользователя

Страница: 12 / 16

12 DLPU063 – January 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Circuit Description
Chapter 7
DLPU063 – January 2018
Circuit Description
7.1 Connectors and Switches on System Board
Table 7-1. Connectors and Switches on System Board
CONNECTORS/ HEADERS/ SWITCHES DESCRIPTION
J1 MSP430 JTAG Programming interface connector.
J2 Reserved (not installed by default).
J3 Reserved (not installed by default).
J4 Connector for 19-V external power supply interface.
J5 Reserved (not installed by default).
J6 Header for EDID programming.
J7 Header for 5-V DC power (used for LED cooling fan).
J8 Header for 5-V DC power (used for LED cooling fan).
J9 Header for 5-V DC power (used for LED cooling fan).
J10 Connector (60-pin) for DLP LightCrafter Display board interface.
J11 Connector for HDMI input.
J12 Connector for USB cable.
J13 Connector for the I
2
C interface (DevaSys box, not installed by default).
SW1 Reserved.
SW2 Projector ON/OFF Switch.
7.2 Connectors on DLP LightCrafter Display Board
Table 7-2. Connectors on the DLP LightCrafter Display Board
CONNECTORS DESCRIPTION
J1 Reserved (not installed by default).
J2 Reserved (not installed by default).
J3 Reserved (not installed by default).
J4 Reserved (not installed by default).
J5 Connector for optical engine flex cable.
J6 Reserved (not installed by default).
J7 Reserved (not installed by default).
J8 Connector for Green LED cable.
J9 Connector for Blue LED cable.
J10 Connector for the DMD interface flex cable.
J11 Connector for Red LED cable.
J12 Connector (60-pin) for FPD interface.
J13 Connector (60-pin) for DLP LightCrafter System board interface.