EVM Software Setup
4
EVM Software Setup
This section discusses how to install the EVM software.
4.1
Operating Systems for EVM Software
The EVM software has been tested on the Windows XP and Windows 7 operating systems with United
States and European regional settings. The software should also function on other Windows operating
systems.
4.2
EVM Software Installation
The EVM software is included on the CD that is shipped with the EVM kit. It is also available through the
EVM product folder on the
. To install the software, insert the included CD into an available CD-
ROM drive. Navigate to the drive contents and open the DAC8760EVM software folder. Locate the
compressed file named
DACx760EMC-EVM.zip
or
DACx750EMC-EVM.zip
and open it. Extract the EVM
files into a specific folder (for example, C:\DAC8760EVM) on your hard drive.
After the files are extracted, navigate to the folder you created on your hard drive. Locate and execute the
setup.exe
file to start the installation, as shown in
. The DAC8760 software installer file then
opens to begin the installation process.
Figure 7. DAC8760EVM Installer
9
SBAU229 – April 2014
DACx760EMC-EVM
Copyright © 2014, Texas Instruments Incorporated
