Quick-Start Guide
6
SLAU726 – August 2017
Copyright © 2017, Texas Instruments Incorporated
DAC90x Evaluation Module
2.2.2
DAC90xEVM Setup
Continue the hardware setup of the DAC90xEVM using the following:
1. Connect the power supply cables to the EVM. refer to
and
for proper connections.
Figure 4. Power Supply Connections
2. Connect the SMA connector from the pulse generator to the EXT Clock input (J5).
3. Turn on the power supply.
4. Connect an SMA cable from the output of the DAC90xEVM (J6) to the input of the spectrum analyzer.
2.3
Software Setup Procedure
The software can be opened and configured once the hardware is properly setup.
2.3.1
HSDC Pro GUI Configuration
1. Open High Speed Data Converter Pro by going to
Start Menu
→
All Programs
→
Texas Instruments
→
High Speed Data Converter Pro
. The GUI main page looks as shown in
