EVM Operation
www.ti.com
The result of the DAC8801/11EVM characterization test is shown in
. Note that the DAC8811
uses the OPA277 for the I-to-V conversion.
Figure 8. INL and DNL Characterization Plot for the DAC8811
6
EVM Operation
This section covers in detail the operation of the EVM to provide guidance to the user in evaluating the
onboard MDAC and how to interface the EVM to a host processor.
See the specific MDAC data sheet, as listed in the Related Documentation from Texas Instruments
section of this user guide (
), for more information about the MDAC serial interface and other
related topics.
The EVM board is factory tested and configured to operate in the bipolar output mode.
8
DAC8801/11EVM
SLAU151A – January 2005 – Revised November 2009
Copyright © 2005–2009, Texas Instruments Incorporated