Texas Instruments Chipcon CC2400DBK, Руководство пользователя, Страница: 3 / 31

SWRU048 Page 3 of 30
Introduction
The CC2400 single-chip RF transceiver provides a highly integrated, flexible low-cost solution
for applications using the world wide unlicensed 2.4 GHz frequency band. The CC2400DBK
demonstration board kit is a complement to the development kit (DK) as the hardware is
representative of an actual application, and it is well suited as a prototyping platform for
application code.
The CC2400DBK Demonstration Board Kit includes two CC2400DB Demonstration Boards.
These boards contain a CC2400 with necessary support components, an Atmel mega8 AVR
microcontroller, a PCB antenna, as well as a joystick, buttons and LEDs that can be used to
implement a visual user application interface. The demonstration board is also furnished with
connectors where all of the internal signals on the PCB are available.
This User Manual describes how to use the CC2400DBK Demonstration Board Kit. Atmel’s
AVR Studio and associated software is used to program and debug software. Please see the
reference section of this document for links to Atmel’s documentation on how to use their
tools.
Your CC2400DBK Demonstration Board Kit should contain the following items:
Kit contents
Item Number of articles
Demonstration Board (CC2400DB) 2
Quick Start instructions 1
CC2400 sample kit 1
RS-232 cables 2
Important:
Contact your local telecommunication authorities before transmitting an RF signal to ensure
that there are no local restrictions on the use of the 2400 –2483.5 MHz ISM band. The
CC2400 operates in the 2.4 GHz frequency band. Although this frequency band is usually
described as “world-wide”, some countries do not allow unlicensed operation in this band.