Hardware Description
Table 9. LEDs
Referenc
Color
Usage
Comments
e
This LED is used to indicate the state of
D1
Yellow
nRESET
nRESET pin. If this LED is glowing, the
device is functional.
This LED glows whenever the debugging is
D2
Green
Debug
enabled over the JTAG.
Indicates when the 3.3 V power is supplied to
D4
Red
Power
the board.
D5
Green
GPIO_11
(1)
Glows when the GPIO is logic-1
D6
Yellow
GPIO_10
(1)
Glows when the GPIO is logic-1
D7
Red
GPIO_09
Glows when the GPIO is logic-1
(1)
GPIO_10 and GPIO_11 are used as I2C also. So whenever the pull-ups are enabled, the LEDs would glow.
13
SWRU397 – December 2014
CC3200MOD SimpleLink™ Microcontroller and Wi-Fi® Network Processor
Module - LaunchPad Hardware
Copyright © 2014, Texas Instruments Incorporated