BUF20800/20820EVM Software Overview
www.ti.com
5.2.9
Run Batch Button
The Run Batch button (as highlighted in
) enables the user to configure the BUF20800 of
BUF20820 to cycle through different register configurations in a continuous loop. When connected to the
end application, this feature can be used to cycle through different gamma settings to determine what the
optimal settings must be for a given application.
When the Run Batch button is pressed, a new dialog box displays as
shows. The delay time is
the amount of time allowed between loading new configurations into the BUF20800/20820 DUT.
Use the Single Step Up and Single Step Down buttons to step through the selected files manually. The
currently-selected file name is displayed in the lower left corner area of the dialog box. Double-click on the
file names to select them. Once a series of filenames have been selected, the check box turns dark.
Double-click on a filename again to unselect it from the batch run.
Figure 23. Run Batch Dialog Button and Window
24
BUF20800/20820EVM User Guide and Software Tutorial
SBOU100 – April 2011
© 2011, Texas Instruments Incorporated
