BUF16821EVM-USB Software Overview
24
SBOU106A – May 2011 – Revised May 2016
Copyright © 2011–2016, Texas Instruments Incorporated
BUF16821EVM-USB Evaluation Board and Software Tutorial
5.2.9
Run Batch Button
The
Run Batch
button (as highlighted in
) enables the user to configure the BUF16821 to cycle
through different register configurations in a continuous loop. When connected to the end application, this
feature can be used to cycle through different gamma settings to determine what the optimal settings must
be for a given application.
When the
Run Batch
button is pressed, a new dialog box displays as
shows. The delay time is
the amount of time allowed between loading new configurations into the BUF16821 DUT.
Use the
Single Step Up
and
Single Step Down
buttons to step through the selected files manually. The
currently-selected file name is displayed in the lower left corner area of the dialog box. Double-click on the
file names to select them. Once a series of filenames have been selected, the check box turns dark.
Double-click on a filename again to unselect it from the batch run.
Figure 22. Run Batch Dialog Button and Window