Connectors
5
SLUUC57A – October 2019 – Revised June 2020
Copyright © 2019–2020, Texas Instruments Incorporated
BQ79600-Q1 Evaluation Module
Table 2. Jumper Placements (continued)
Pinheader
Contacts
Jumper Connection
Populated by Default?
J10
1-2, 2-3
nUART_SPIRDY pullup to VIO
for SPI (1-2), or pulldown to
GND for UART (2-3)
Yes (2-3)
J11
1-2, 2-3
nCS pullup to VIO for SPI (1-
2), or pulldown to GND for
UART (2-3)
Yes (2-3)
J12
1-2, 2-3
SCLK pullup to VIO (1-2) or
pulldown to GND for SPI/UART
(2-3)
Yes (2-3)
J13
1-2
NFAULT pullup to VIO
Yes
3.1.2
Power Supply
The power supply connection is made from either the 5-V test point or 12-V test point. When powering the
EVM directly through the 12-V battery, configure jumpers J1 and J3 in the "12V" configuration and connect
the 12-V battery to the 12-V test point. If the EVM is powered up through a PMIC or 5-V regulator,
configure jumpers J1 and J3 in the "5V" configuration and connect the PMIC/regulator 5-V output to the 5-
V test point.
Figure 2. Keystone5010 (reference image only)