Texas Instruments bq50002, Руководство пользователя

Страница: 14 / 25

Test Setup
www.ti.com
6.3.2 bqStudio
Turn on the input power supply, verify the input voltage at J1 is 4.9 V to 5.1 V and the current is less than
100 mA. Turn on the computer and open the bq50002 evaluation software. Select “Charger” and click
next. Select charger_1_00_bq50002.bqz and click finish. The main window of the software is shown in
Figure 3 .
Figure 3. bqStudio Window
Place your mouse on the Device Version Value cell, the device version should be “0.1.2.2745”, as shown
in
Figure 3 .
Figure 4. Device ID
Turn off power supply. And disconnect the EV2400 box from the EVM and the computer.
14 bq50002 Wireless Power TX EVM SLVUAJ7 – October 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated