Texas Instruments bq25600, Руководство пользователя

Страница: 2 / 24

Introduction
www.ti.com
2 SLUUBK9 – September 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
bq25600, bq25600D PWR771 Evaluation Module
1 Introduction
1.1 EVM Features
For detailed features and operation, see Table 1 for a list of devices and their data sheets.
Table 1. Device Data Sheets
Device Data Sheet EVM Label Variant
bq25600 SLUSCJ4 bq25600EVM-771 003
bq25600D SLUSCJ4 bq25600DEVM-771 004
The bq25600(D) evaluation module (EVM) is a complete charger module for evaluating an I
2
C-controlled
single NVDC-1 charge using the bq25600(D) device.
This EVM does not include the USB-to-GPIO or EV2300/EV2400 interface board. To evaluate the EVM, a
USB-to-GPIO interface board must be ordered separately.
1.2 I/O Descriptions
Table 2 lists the jumper connections available on this EVM.
Table 2. PWR771 EVM Connections
Jack Description
J1-VAC Input: positive terminal
J1-GND Input: negative terminal (ground terminal)
J2-PMID PMID pin connection, power bank output
J2-GND Ground and power bank output negative terminal
J3 Output mini-USB port
J4-SYS Connected to system
J4-GND Ground
J5-BAT Connected to battery pack
J5-BATSNS Connected to battery pack for voltage sensing
J5-GND Ground
J6 I
2
C 4-pin connector
J7 USB-TO-GPIO connector