Texas Instruments BQ24392EVM, Руководство пользователя, Страница: 7 / 22

www.ti.com
BQ24392 Implementation Guidelines
3.5.2 GOOD_BAT Selection Jumper
There is a 3-pin header (J3) on the EVM to select the GOOD_BAT input to be high or low. The jumper
positioning is fully labeled on the EVM itself for ease of use.
Figure 4 and Figure 5 illustrate the schematic
and the EVM board labeling.
Figure 4. Schematic for GOOD_BAT Selection Header
Figure 5. GOOD_BAT Selection Header on EVM
3.5.3 Test Points
The EVM also contains test point for the 3 outputs, 1 input, and the D+ D– pins. Figure 6 shows the
schematic for these test points and the locations on the EVM.
Figure 6. Test Point Locations
7 SLVUA61 – April 2014 BQ24392EVM User's Guide
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated