Texas Instruments BQ24296M, Руководство пользователя

Страница: 2 / 27

Introduction
www.ti.com
1 Introduction
1.1 EVM Features
For detailed features and operation, refer to Table 1 for a list of devices and their data sheets.
Table 1. Device Data Sheets
Device Document
bq24296M SLUSBU3
bq24298 SLUSC59
The bq24296M and bq24298 evaluation modules (EVM) are complete charger modules for evaluating an
I
2
C-controlled single NVDC-1 charge using the bq24296M and bq24298 devices.
This EVM doesn’t include the USB-to-GPIO interface board. To evaluate the EVM, a USB-to-GPIO
interface board must be ordered separately.
1.2 I/O Descriptions
Table 2 lists the jumper connections available on this EVM.
Table 2. EVM Connections
Jack Description
J1–VBUS Input: positive terminal
J1–GND Input: negative terminal (ground terminal)
J2–PMID PMID pin connection/Power bank output
J2–GND Ground/Power bank output negative terminal
J3–SYS Connected to system
J3–GND Ground
J4–BAT+ Connected to battery pack
J4–GND Ground
J6–INT INT pin connection
J6– OTG OTG pin connection
J6–CE CE pin connection
J6–GND Ground
J7 USB-to-GPIO connector (USB interface adapter connector – EV2300 or EV2400)
J8 External TS1 pin connection
J8 Ground
J9 External TS2 pin connection
J9 Ground
2 bq24296M and bq24298 EVM (PWR655) User’s Guide SLUUB62A – August 2014 – Revised March 2015
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated