www.ti.com
8.2
Setting Programmable bq20z70 and bq29330 Options
Operation
Figure 8. SBS Data Screen
This screen shows the SBS data set along with additional ManufacturersAccess() command information
such as individual cell measurements. Additional Flag and Static data can be viewed by selecting the
appropriate tab at the bottom of the SBS screen.
Data such as SBS.ManufacturerName( ) is static and does not change. This data is viewed separately
using the Static Data tab available at the bottom of the screen.
Dragging the splitter bar (line that separates the Flags/Static data from SBS values) changes the height of
the Flags/Static Data display. Selecting |View| then |Auto Arrange| returns the splitter bar to its original
location.
The bq20z70 data flash comes configured per the default settings detailed in the bq20z70 data sheet
(
). Ensure that the settings are correctly changed to match the pack and application for the
bq20z70/bq29330 solution being evaluated.
IMPORTANT: The correct setting of these options is essential to get the best performance.
SLUU242A – May 2006 – Revised June 2006
bq20z70EVM-001 SBS 1.1 Impedance Track™Technology
13
Enabled Battery Management Solution Evaluation Module
