Texas Instruments bq2083EVM-001, Руководство пользователя

Страница: 22 / 33

Software Installation
5-2
5.1 Software Installation
The following steps install the EV2200-83 software:
1) Insert disk 1 into a 3 1/2 inch floppy drive.
2) Select the 3 1/2 inch drive using My Computer or File Manager.
3) Double-click on the Setup.exe icon.
4) The setup program prompts for the remaining disks and installs a
Windows

application group.
5.2 Hardware Connection
There are three hardware components to the bq2083EVM−001: the
bq2083/bq29311circuit module, the EV2200 PC interface board, and the PC.
5.2.1 Connecting the bq2083/bq29311 Circuit Module to a Battery Pack
Figure 5−1 shows how to connect the bq2083/bq29311circuit module to the
cells, and system load/charger.
The cells should be connected in the following order.
-
4-Cell Pack: BAT−, BAT+, 1P, 2P and then 3P. (see Section 2.1 for
definitions)
-
3-Cell Pack: BAT−, BAT+, 1P, 2P and then connect BAT+ and 3P together.
Figure 5−1. bq2083/bq29311 Circuit Module Connection to Cells and System
Load/Charger
Load/Charger
Optional
to SMBD/HDQ1
to SMBC/HDQ2
to VSS
EV2200
5.2.2 PC Interface Connection
The following steps configure the hardware for interface to the PC:
1) Connect the bq2083/bq29311-based smart battery to the EV2200 using
wire leads as in Table 5−1.