IPG-UI Setup for BOOSTXL-TPS65218
11
SLVUBH5 – October 2018
Copyright © 2018, Texas Instruments Incorporated
Software Instructions
Figure 7. Creating New IPG-UI Project for the TPS65218D0
•
Click the
Create Project
button.
NOTE:
After a project is initially created, it is available in the
Create Projects from Recent Devices
menu. When a project is saved, it is available in the
Open Recent Projects
menu.
•
The TPS65218
Introduction
tab is now displayed, as shown in
. Click the
Get Started
button or
the
Register Map
tab to begin communicating with TPS65218D0 device.
Figure 8. TPS65218D0 Project Introduction Tab in IPG-UI
•
Click the
Read All
button and verify that data has changed in the
CHIPID
register from 0x00 to 0x05.
Verify that only blue notifications appear. Blue notifications are informational only and do not indicate
an error has occurred.
