BOOSTXL-ADS7841-Q1EVM EVM Setup
9
SNAU229 – December 2017
Copyright © 2017, Texas Instruments Incorporated
BOOSTXL-ADS7841-Q1 BoosterPack™ User's Guide
3.2
LM Flash Programmer for TM4C1294 LaunchPad™ Software Programming
The TM4C1294 LaunchPad™ ships with a default firmware program flashed on its memory. When a
TM4C1294 LaunchPad™ is connected to the PC for the first time, its firmware needs to be updated for
communications with the BOOSTXL-ADS7841-Q1 EVM. The following steps describe the programming of
this firmware on the flash memory:
1. Download the latest version of
. The LM Flash Programmer is also included as
part of the BOOSTXL-ADS7841-Q1 EVM GUI installation in the following folder: C:\Program Files
(x86)\Texas Instruments\ADS7841\Firmware
2. Make sure the power select JP1 jumper on the TM4C1294 LaunchPad™ is on ICDI. Connect the
Debug USB port
on the TM4C1294 LaunchPad™ to the PC with a micro USB cable as shown in
. This must light the green power LED D0 on the TM4C1294 LaunchPad™.
Figure 6. TM4C1294 LaunchPad™ Software Programming Setup
