Texas Instruments AMC1210MB-EVM, Руководство пользователя, Страница: 6 / 25

Software
www.ti.com
3 Software
The program for evaluating the AMC1210MB-EVM is the AMC1210EVM software. This program uses the
NI-VISA
™ client to communicate with the hardware through a USB port. The program currently runs only
on PCs with the Microsoft Windows XP operating system. Windows Vista and Windows 7 are not
supported.
3.1 Installation
Follow these procedures to install the AMC1210MB-EVM software.
Step 1. Install the AMC1210MB-EVM software and LabVIEW ™ RunTime Engine software. The
screen shown in Figure 1 appears as you start this process.
Figure 1. AMC1210EVM Software Installation
Step 2. After the AMC1210EVM software is installed, apply power to the EVM and connect the EVM
to an available PC USB port. The computer should recognize new hardware and begin
installing the driver. Accept the default settings.
Figure 2 through Figure 5 show the driver installation sequence.
6 AMC1210MB-EVM SBAU188 – February 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated