Software
The toolbar shown in
is present, regardless of the mode of operation of the AMC1210MB-EVM
software. The left-most button is used to switch between Current-Shunt Mode and Resolver Demo Mode.
The remaining buttons are provided for convenience to quickly access information about the device or visit
the
for support or device queries.
Figure 8. AMC1210MB-EVM Software Toolbar
The AMC1210MB-EVM software includes a feature that saves any collected data from either the Resolver
or Current Shunt Data tabs to export collected data to another analysis tool.
shows the save data
interface. To save collected data, click the folder icon to browse the file system, or type a path where the
exported data will be saved to a text file. Once the data is collected, click the Save Data button to export
the data.
Figure 9. Save Data Interface
With the software in Current Shunt Mode, there are two tabs available: Current Shunt Settings (refer to
), and Current Shunt Data, as shown in
. The Current Shunt Settings tab makes the
control, sinc filter, and integrator filter register settings available for filter modules 1 and 2 on the
AMC1210. Alarm registers and interrupts are not supported by the AMC1210MB-EVM evaluation software.
Figure 10. AMC1210MB-EVM Software Current Shunt Data GUI
10
AMC1210MB-EVM
SBAU188
–
February 2012
Copyright
©
2012, Texas Instruments Incorporated