shows the terminal and pin locations on the EVM.
Power Terminals
(Optional)
USB2ANY
SPI
UART
REF EN
POL_SEL
RX Filter
AFE881H1
UARTIN
CLKOUT
AIN
Connections
VOUT
MOD IN
MOD OUT
IOVDD
PVDD
GND
RX_IN/
INF SEL
Power from
USB2ANY
(Default)
External
Reference
VOUT Load
IOVDD
Connect
VDD Connection
for low supplies
Figure 3-3. Terminal and Pin Locations for the AFE881H1EVM
3.5 Connecting the USB2ANY
To connect the EVM board and the USB2ANY Interface Adapter together, firmly slide the cable ends of the
30-pin ribbon cable into the USB2ANY Interface Adapter and the AFE881H1EVM, as shown in
sure that the connectors are completely pushed together. Loose connections between the USB2ANY and the
EVM may cause intermittent operation.
USB2ANY
AFE881H1EVM
Figure 3-4. USB2ANY Connection to the AFE881H1EVM
EVM Hardware Overview
AFE881H1 Evaluation Module
9
Copyright © 2021 Texas Instruments Incorporated