35
SLOU430A – December 2015 – Revised February 2016
Copyright © 2015–2016, Texas Instruments Incorporated
Triggering Options
Appendix C
SLOU430A – December 2015 – Revised February 2016
Triggering Options
Software Trigger
One method of triggering the TSW EVM, AFE EVM as well as other bench equipment such as function
generators is to generate the trigger from the TSW EVM itself. This requires a feedback loop from the
TSW trigger output to the TSW trigger input using a short SMA cable. Secondly, a second trigger output
from the TSW board can be routed to the AFE EVM, if needed, or to external bench equipment such as a
function generator. See the TSW or HSDCPro manual for more information.
Figure 51. HSDCPro Trigger Configuration for SW
Figure 52. HSDCPro Trigger Configuration for SW trigger