Texas Instruments ADS9110EVM-PDK, Руководство пользователя, Страница: 14 / 37

ADS9110EVM-PDK Operation
www.ti.com
6 ADS9110EVM-PDK Operation
The following instructions are a step-by-step guide to connecting the ADS9110EVM-PDK to the computer
and evaluating the performance of the ADS9110:
1. Connect the ADS9110EVM to the PHI. Install the two screws as indicated in Figure 8 .
2. Use the USB cable provided to connect the PHI to the computer.
• LED D5 on the PHI lights up, indicating that the PHI is powered up.
• LEDs D1 and D2 on the PHI starts blinking to indicate that the PHI is booted up and
communicating with the PC. The resulting LED indicators are shown in
Figure 8 .
Figure 8. EVM-PDK Hardware Setup and LED Indicators
3. Launch the ADS9110EVM GUI software, as shown in Figure 9 .
14 ADS9110EVM-PDK SBAU249 – October 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated