ADS8688EVM-PDK Kit Operation
6.3.2
Register Map View
All registers can be read or written by the register map view in the GUI. The register map view can be
activated by clicking on the Register Map View button in the system block diagram view, as shown in
. The register map table provides a complete list of program registers present in the ADS8688
device. The user must provide data in hexadecimal for writing registers. The user also must select the
register in the register map, provide data in the Write Data box, and click the Write Register button to write
the register. For reading a register, the user must select the register in the register map and click the Read
Register button. All registers can be read by clicking the Read All button. The values for all registers can
be saved in a configuration file (.cfg) by the Save Config button. The saved configuration can be loaded
back by using the Load Config button. Changes made in the register map view are reflected in the system
block view and vice-versa. For details on the ADS8688 program registers, refer to the program register
map in the
.
shows the register map view.
Figure 19. Register Map View
21
SBAU230A – August 2014 – Revised December 2014
ADS8688EVM-PDK Evaluation Module
Copyright © 2014, Texas Instruments Incorporated
