
ADS794xEVM-PDK: Software Installation
11
SBAU194B – August 2011 – Revised September 2017
Copyright © 2011–2017, Texas Instruments Incorporated
ADS794xEVM and ADS794xEVM-PDK
6.1
Installing the ADCPro Software
CAUTION
Do not connect the ADS794xEVM-PDK to a PC before completing
through
. Failure to observe this caution may cause Microsoft
Windows to not recognize the ADS794xEVM-PDK as a connected device.
ADCPro is the primary program used to evaluate ADCs. The latest software version of ADCPro is
available from the TI website at
. Refer to the
for instructions on installing
and using ADCPro.
6.2
Installing ADS794xEVM-PDK Plug-In Software
The ADS794xEVM-PDK plug-in uses ADCPro; you must install ADCPro before uploading the plug-in.
To install the ADS794xEVM-PDK plug-in, run the file:
ads794X-adcproplugin-<version #>.exe
(
<version
#>
refers to the installation file version number, and increments with software version releases). Double-
click the file to run it; then follow the instructions as shown. You can also use the ADCPro
Update Check
feature to check for newer versions of the ADS794xEVM-PDK plug-in, once you have installed a version
of it.
and
show the initial and completed installer screenshots, respectively.
Figure 4. ADS794xEVM-PDK Plug-In Installer
Figure 5. Completed ADS794xEVM-PDK Installer