Power Supplies
4
Power Supplies
The analog portion of the ADSxx53EVM-PDK requires a 5-V supply. The ADSxx53EVM-PDK is configured
at the factory using the onboard regulated analog 5-V supply (+VA); and an onboard 3.3-V digital supply.
Alternatively, set the AVDD analog supply voltage by connecting an external power source through two-
terminal connector (J5).
lists the configuration details for P3.
Table 5. Power-Supply Jumpers
Pin Number
Pin Name
Function
JP12
Shunt 2-3 (default)
Onboard 5-V AVDD analog supply selected
Shunt 1-2
External 5-V AVDD connected through two-terminal
block J5
JP11
Open
Onboard regulated AVDD supply set to 5.0 V
Closed
Onboard regulated AVDD supply set to 5.2 V
CAUTION
The external AVDD supply applied to external two-terminal connector J5 must
not exceed 5.5 V or device damage may occur. The external AVDD supply
must be in the range of 5.0 V to 5.5 V for proper ADSxx53EVM operation.
10
ADS8353EVM-PDK and ADS7853EVM-PDK
SBAU210A – June 2014 – Revised August 2014
Copyright © 2014, Texas Instruments Incorporated