ADS7041EVM-PDK Initial Setup
5.2.3
Install the ADS7041EVM-PDK Software
The ADS7041 EVM V#.#.# software must be installed on the PC. This software supports the ADS7041-
PDK. Administrator privileges are required to install the EVM software. The following steps list the
directions to install the software:
Step 1.
Open Windows Explorer and find the microSD memory card in the browser as a storage
device.
Step 2.
Navigate to the ...\
ADS7041 EVM Vx.x.x\Volume
\ folder.
Step 3.
Run the installer by double-clicking the file
setup.exe
. This action installs the EVM GUI
software and the required and device driver components.
Step 4.
After the installer begins, a welcome screen displays. Click
Next
to continue.
Step 5.
A prompt appears with the destination directory; select the default directory
under: ...\
Program Files(x86)\Texas Instruments\ADS7041evm
\.
Figure 7. Welcome Screen and Destination Directory Screens
Step 6.
One or more software license agreements appear. Select
I Accept the License Agreement
and click
Next
.
Step 7.
The
Start Installation
screen appears. Click
Next
.
Figure 8. License Agreement and Start Installation Screens
Step 8.
A progress bar appears; this step takes a few minutes.
Step 9.
The progress bar is followed by an
Installation Complete
notice.
8
ADS7041EVM-PDK
SBAU239 – November 2014
Copyright © 2014, Texas Instruments Incorporated