Texas Instruments ADS58J64 EVM Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 20

Texas Instruments ADS58J64 EVM Скачать руководство пользователя страница 5

Quick Start Guide

5

SBAU284 – January 2017

Submit Documentation Feedback

Copyright © 2017, Texas Instruments Incorporated

ADS58J64 EVM

2.1.2

High-Speed Data Converter Pro GUI Installation

High-Speed Data Converter Pro (HSDC Pro) is used to control the TSW14J56EVM and analyze the
captured data. Please see the HSDC Pro user’s guide for more information.

1. Download HSDC Pro from the TI website.

contains the link to find the software on the TI

website.

2. Extract the files from the zip file.

3. Run setup.exe and follow the installation prompts.

2.2

Hardware Setup Procedure

shows a typical test setup using the ADS58J64EVM and TSW14J56EVM REV D devices. This

test setup is used for the quick start procedure. The rest of this section describes the hardware setup
steps.

Figure 2. Quick Start Test Setup

2.2.1

TSW14J56EVM Setup

Set up the TSW14J56EVM device by following these instructions.

1. Connect the ADS58J64EVM device to the TSW14J56EVM device using the FMC connectors.

2. Connect the included 5-V power supply to connector J11 (5-V IN) of the TSW14J56EVM device.

3. Connect the included mini-USB cable to the USB connector (J9) of the TSW14J56EVM device.

4. Move the power switch (SW6) of the TSW14J56EVM device to the

on

position.

«
...
3
4
5
6
7
...
»

Содержание ADS58J64 EVM





















Отзывы:

Нет отзывов