Texas Instruments ADS58J64 EVM, Руководство пользователя, Страница: 16 / 20

16 SBAU284 – January 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
Appendix A
SBAU284 – January 2017
A.1 Jumper, Header, and Button Descriptions
Table 8 lists the EVM jumpers and buttons, as well as the default settings for the jumpers. If there are
issues, use Table 8 to reset the EVM in the default configuration.
Table 8. Jumper and Button Descriptions and Default Settings
Jumper Description Default Setting
JP7
Rx Global Power-Down
Short 2 – 3
Short 1 – 2: Force as logic HIGH (power
down)
Short 2 – 3: Force as logic LOW (normal
operation)
NOTE: Open is not
a valid state
for this
jumper.
JP3
SPI Select, CPLD
Short 2 – 3
Short 1 – 2: Reserved. Do not use this
state.
Short 2 – 3: Default state
NOTE: Open is not
a valid state
for this
jumper.
JP2
VCXO Power
Short Short: Supplies 3.3 V to Y1 VCXO
Open: Disconnects power from Y1 VCXO
TRIGAB
External trigger for Burst Mode, channels
A and B
Open
Pin 1: Trigger signal, 1.8-V logic
Pin 2: Ground
Open: Trigger function not used
TRIGCD
External trigger input for Burst Mode,
channels C and D
Open
Pin 1: Trigger signal, 1.8-V logic
Pin 2: Ground
Open: Trigger function not used
TRDYAB
Trigger Ready output for Burst Mode,
channel A and B
Open
Pin 1: Trigger ready signal, 1.8-V logic
Pin 2: Ground