Board Configuration
Table 1. Input/Output, Power, and USB (continued)
Connector
Description
TP1, TP2, TP3,
Ground test points.
TP4, TP5, TP14,
TP21, TP23,
TP25, TP34,
USB1
USB interface connector
Table 2. Channel 8 Configuration
Input Interface Type
Connector
Description
Through Transformer
J6
In default configuration, R171 and R172 are already populated
(Default)
Through Amplifier (Not
J16
It is an alternative input for channel 8. Need to install two resistors (R169 and
Default)
R170) and remove two resistors(R171 and R172) from J6.It uses TI THS4509
single-ended to differential amplifier.
30
ADS5295, 8-Channel, Analog-to-Digital Converter Evaluation Module
SLAU442 – November 2012
Copyright © 2012, Texas Instruments Incorporated