www.ti.com
Running the Software
The following main buttons/controls are available in this sub-tab
Button/Control
Description
Scope Analysis
Displays the mean, root mean square (RMS), and peak-to-peak for noise analysis of the acquired data
Plot
Channel selection button allow selecting All channels, Channel 1, or Channel 2 for display
Histogram Sub-Tab
The Histogram sub-tab displays the data in a histogram format for the two channels. The data is arranged
in the total number of histogram bins set within the tab following acquisition. The Histogram Analysis
button can be used to view the mean voltage, root mean square (RMS) voltage and peak to peak voltage
for analysis.
Figure 26. PC Application Analysis - Histogram
The following buttons/controls are available in this sub-tab
Button/Control
Description
Histogram Analysis
Runs histogram of the selected channel(s) for the selected number of samples
Plot
Channel selection button allow selecting all channels or Channel 1 or Channel 2 for the display
Histogram Bins
Set the total number of bins to arrange the individual channels
Display Plane(Right click on
Various display planes can be selected for the histogram display. The options available are:
the display area and then
• Nyquist
select “Optional Plane”
• Nichols
menu item)
• S Plane
• Z Plane
21
SLAU384A – December 2011 – Revised April 2012
ADS1x9xECG-FE Demonstration Kit
Submit Documentation Feedback
Copyright © 2011–2012, Texas Instruments Incorporated