Texas Instruments ADS1675REF, Руководство пользователя, Страница: 15 / 24

www.ti.com
Schematic and Bill of Materials
Press the Acquire button. Depending on the size of the sample set captured and the speed for which the
ADS1675 is configured, the time required to display the data in the screen varies.
Figure 15 shows the
results of a 1MSPS sample rate in CMOS mode with the wide-bandwidth filter selected.
Figure 15. CMOS Mode with Wide-Bandwidth Filter at 1MSPS Sample Rate
NOTE: 100% of ADS1675REF boards have been tested to ensure that 10kHz analog input signal at
4MSPS data sheet limits are achievable with the ADS1672REF and ADCPro.
7.5 Troubleshooting
If ADCPro stops responding while the ADS1675REF is connected, try unplugging the power supply from
the REF, making sure to unload and reload the plug-in before reapplying power to the board.
8 Schematic and Bill of Materials
Schematics for the ADS1675REF are appended to this user's guide. The bill of materials is listed in
Table 3 . Figure 16 shows a top-level silkscreen of the PCB.
NOTE: Board layouts are not to scale. These figures are intended to show how the board is laid
out; they are not intended to be used for manufacturing ADS1675REF PCBs.
15 SBAU162A – December 2009 – Revised September 2010 ADS1675REF
Submit Documentation Feedback
Copyright © 2009–2010, Texas Instruments Incorporated