Texas Instruments ADS131M04, Руководство пользователя, Страница: 14 / 34

INSTALL
D2 D1
D5
ADS131M04EVM Operation
www.ti.com
14 SBAU332A – March 2019 – Revised June 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
ADS131M04 Evaluation Module
Verify that C:\Program Files (x86)\Texas Instruments\ADS131M04EVM is as shown in Figure 9 after these
installations.
Figure 9. ADS131M04EVM GUI Folder Post-Installation
6 ADS131M04EVM Operation
The following instructions are a step-by-step guide to connecting the ADS131M04EVM to the computer
and evaluating the performance of the ADS131M04:
1. Connect the ADS131M04EVM to the PHI. Install the two screws as indicated in Figure 10 .
2. Use the provided USB cable to connect the PHI to the computer.
• LED D5 on the PHI lights up, indicating that the PHI is powered up
• LEDs D1 and D2 on the PHI start blinking to indicate that the PHI is booted up and communicating
with the PC;
Figure 10 shows the resulting LED indicators
Figure 10. ADS131M04EVM Hardware Setup and LED Indicators