Texas Instruments ADS131E08EVM-PDK Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 39

Texas Instruments ADS131E08EVM-PDK Скачать руководство пользователя страница 3

ADS131E08EVM Overview

3

SBAU200C – June 2012 – Revised April 2020

Submit Documentation Feedback

Copyright © 2012–2020, Texas Instruments Incorporated

Performance Demonstration Kit for the ADS131E08

Trademarks

Pentium III, Celeron are registered trademarks of Intel Corporation.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
SPI is a trademark of Motorola, Inc..
All other trademarks are the property of their respective owners.

1

ADS131E08EVM Overview

1.1

Information about Cautions

This document contains caution statements. The information in a caution statement is provided for your
protection. Be sure to read each caution carefully.

CAUTION

This is an example of a caution statement. A caution statement describes a
situation that could potentially damage your software or equipment.

1.2

Introduction

The ADS131E08EVM-PDK is intended for evaluating the ADS131E08 low-power, 24-bit, simultaneously-
sampling, eight-channel analog-to-digital converter (ADC). The digital SPI™ control interface is provided
by the MMB0 modular EVM motherboard that connects to the ADS131E08 evaluation board. The
ADS131E08EVM-PDK is designed to expedite evaluation and system development.

The MMB0 motherboard allows the ADS131E08EVM to be connected to the computer thorugh an
available USB port. This manual shows how to use the MMB0 as part of the ADS131E08EVM-PDK, but
does not provide technical details about the MMB0.

1.3

Supported Features

Hardware Features:

•

Configurable for bipolar or unipolar supply operation

•

Configurable for internal and external clock through jumper settings

•

Analog test signals can be applied easily using screw terminals

Software Features:

•

Analysis tools, including a virtual oscilloscope, histogram, and fast Fourier transform (FFT)

•

Access to a variety of register contents, including data rate, PGA options, and more.

•

Set ADS131E08 register settings with easy-to-use, graphical user interface (GUI) software

1.3.1

Features Not Supported in Current Version

32 kSPS and 64 kSPS data capture is

not

supported by the current version of the firmware.

«
1
2
3
4
5
...
»

Содержание ADS131E08EVM-PDK








































Отзывы:

Нет отзывов