Texas Instruments ADS131B26Q1EVM-PDK, Руководство пользователя

Страница: 14 / 36

Table 5-2 lists the nominal voltages that result from the default configuration.
Table 5-2. Nominal Voltages: Default Configuration
Supply Name Voltage
ISO_VCC 3.3 V
ISO_3V3 3.3 V
VADC_HV 5.1 V
APWR 5.1 V
DPWR 5.1 V
AVDD 3.3 V
DVDD 3.3 V
RCAPA 1.25 V
RCAPB 1.25 V
Note
Voltages are measured with respect to the local ground on the same side of the isolation barrier.
5.2 EVM Graphical User Interface (GUI) Software Installation
Download the latest version of the EVM GUI installer from the Tools and Software folder of the
ADS131B26Q1EVM-PDK and run the GUI installer to install the EVM GUI software on your computer.
CAUTION
Manually disable any antivirus software running on the computer before downloading the EVM GUI
installer onto the local hard disk. Depending on the antivirus settings, an error message may appear
the executable file may be deleted.
Accept the license agreements and follow the on-screen instructions shown in Figure 5-2 to complete the
installation.
Figure 5-2. ADS131B26-Q1 Software Installation Prompt
ADS131B26Q1EVM-PDK Initial Setup www.ti.com
14 ADS131B26Q1EVM-PDK Evaluation Module SBAU413 – OCTOBER 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated