Texas Instruments ADS131B26Q1EVM-PDK, Руководство пользователя

Страница: 13 / 36

5 ADS131B26Q1EVM-PDK Initial Setup
This section explains the initial hardware and software setup procedure that must be completed in order to
properly operate the ADS131B26Q1EVM-PDK.
5.1 Default Jumper Settings
After unpacking, the EVM is configured with the default jumper settings. Figure 5-1 shows the locations for the
default jumpers and Table 5-1 shows the functions of the default shunts.
Figure 5-1. ADS131B26Q1-PDK Jumper Default Settings
Table 5-1. Default Jumper Settings
Designator Position Function
JP1 [1-2] RCAPA is selected as bias voltage for the TMP61
JP2 [2-3] Selects the transformer output as the APWR supply
JP3 [2-3] Selects the transformer output as the DPWR supply
JP4 Not installed The transformer driver is enabled
JP5 Installed The onboard crystal oscillator is disabled
www.ti.com ADS131B26Q1EVM-PDK Initial Setup
SBAU413 – OCTOBER 2022
Submit Document Feedback
ADS131B26Q1EVM-PDK Evaluation Module 13
Copyright © 2022 Texas Instruments Incorporated