Texas Instruments ADS1282EVM, Руководство пользователя, Страница: 10 / 38

ADS1282EVM-PDK Kit Operation
www.ti.com
3. Plug the ADS1282EVM into the MMB0 as Figure 6 illustrates.
Figure 6. Connecting ADS1282EVM to MMB0
CAUTION
Do not misalign the pins when plugging the ADS1282EVM into the MMB0.
Check the pin alignment carefully before applying power to the PDK.
9.2.1 About the MMB0
The MMB0 is a Modular EVM System motherboard. It is designed around the TMS320VC5507 , a DSP
with an onboard USB interface from Texas Instruments. The MMB0 also has 16MB of SDRAM installed.
The MMB0 is not sold as a DSP development board, and it is not available separately. TI cannot offer
support for the MMB0 except as part of an EVM kit. For schematics or other information about the MMB0,
contact Texas Instruments.
10 ADS1282EVM and ADS1282EVM-PDK User ' s Guide SBAU144C – March 2009 – Revised May 2011
Submit Documentation Feedback
Copyright © 2009 – 2011, Texas Instruments Incorporated