Texas Instruments ADS1147EVM, Руководство пользователя

Страница: 29 / 33

www.ti.com
Schematics and Layout
9.2 Troubleshooting
If the ADS1247EVM plug-in cannot find the ADS1247EVM-PDK, press the USB RESET button on the
MMB3 (refer to
Figure 6 ) and try again.
If ADCPro stops responding while the ADS1247EVM-PDK is connected, try unplugging the USB cable
from the PDK. Unload and reload the plug-in before reapplying power to the PDK.
10 Schematics and Layout
Schematics for the ADS1147EVM and ADS1247EVM are appended to this user's guide. The bill of
materials is provided in
Table 7 .
10.1 Bill of Materials
NOTE: All components should be compliant with the European Union Restriction on Use of
Hazardous Substances (RoHS) Directive. Some part numbers may be either leaded or
RoHS. Verify that purchased components are RoHS-compliant. (For more information about
TI's position on RoHS compliance, see the
http://www.ti.com .)
Table 7. ADS1147EVM/ADS1247EVM Bill of Materials
Item No. Qty Value Ref Des Description Vendor Part Number
1 1 N/A ADS1247 EVM PWB Texas 6508039
Instruments
2 4 1 μ F C1-C3, C10 Capacitor, X7R Ceramic 1 μ F ± 10%, TDK C1608X7R1C105KT
16WV, Size = 0603
3 2 22 μ F C4, C5 Capacitor, X5R Ceramic 22 μ F TDK C3225X5R1C226MT
± 20%, 16WV, Size = 1210
4 10 0.1 μ F C6-C8, Capacitor, X7R Ceramic 0.1 μ F TDK C1608X7R1E104KT
C11-C13, C15, ± 10%, 25WV, Size = 0603
C21, C28, C29
5 1 0.15 μ F C14 Capacitor, X7R Ceramic 0.15 μ F Murata GRM188R71C154KA01D
± 10%, 16WV, Size = 0603
6 7 10 μ F C16-C20, C22, Capacitor, X5R Ceramic 10 μ F TDK C2012X5R0J106MT
C23 ± 20%, 6.3WV, Size = 0805
7 4 47pF C24-C27 Capacitor, C0G Ceramic 47pF TDK C1608C0G1H470JT
± 5%, 50WV, Size = 0603
8 1 10nF C9 Capacitor, C0G Ceramic 10nF TDK C1608C0G1E103JT
± 5%, 25WV, Size = 0603
9 3 D1, D2, D5 Diode Schottky 30V 200mA Fairchild BAT54
SOT-23
10 2 D3, D4 5.1V, Zener Diode On MMBZ5231BLT1G
Semiconductor
11 2 J1, J2 Header Strip, 3-pin ( ) Samtec TSW-103-07-L-S
12 1 J3A 10-pin SMT Plug Samtec TSM-105-01-L-DV-P
13 1 J3B 10-pin SMT Socket Samtec SSW-105-22-F-D-VS-K
14 1 J4 Terminal Block, 5 position On Shore ED555/5DS
Technology
15 0 J5 Header Strip, 6-pin ( )
16 2 J6, J9 Header Strip, 2-pin ( ) Samtec TSW-102-07-L-S
17 2 J7A, J8A 20-pin SMT Plug Samtec TSM-110-01-L-DV-P
18 2 J7B, J8B 20-pin SMT Socket Samtec SSW-110-22-F-D-VS-K
19 1 J10 Header Strip, 10-pin ( ) Samtec TSW-105-07-L-D
20 2 Q1, Q2 MOSFET, P-Channel, 2.5V Fairchild FDN302P
21 1 Q3 Enhancement Mode FET, Fairchild FDN337N
N-Channel
22 1 100k Ω RA1 Resistor, 8 Thick Film Chip Array CTS 745C101104JPTR
100k Ω , 5%, 63mW
29 SBAU148B – June 2009 – Revised May 2011 ADS1147EVM, ADS1247EVM, ADS1147EVM-PDK, ADS1247EVM-PDK
Submit Documentation Feedback
Copyright © 2009 – 2011, Texas Instruments Incorporated