ADS1246EVM-PDK Kit Operation
Switch the BSL switch (SW4) on the MMB3 to the BSL position (to the left) as instructed, then press OK.
The plug-in downloads the firmware to the MMB3. This operation may take a couple of minutes, so the
progress is updated in the message at the top of the ADS1246 plug-in window (as
shows). The
firmware is saved in flash memory on the MMB3, so this operation should only need to be performed
once.
Figure 13. Firmware Download Progress Indicator
When the firmware download completes, the message box shown in
appears. Follow the
on-screen instructions and the plug-in should now connect to the EVM.
Figure 14. Firmware Download Complete Message Box
16
ADS1146EVM, ADS1246EVM, ADS1146EVM-PDK, ADS1246EVM-PDK
SBAU149B
–
June 2009
–
Revised May 2011
Copyright
©
2009
–
2011, Texas Instruments Incorporated
