ADS1246EVM-PDK Kit Operation
space
Step 4.
If the plug-in cannot connect to the EVM, you will see a window as shown in
. This
message may indicate that the firmware is not loaded on the MMB3. You may select Retry
Auto Connect; if that action fails, select Retry Manual Connect and specify the COM port to
be used.
Figure 11. Connection Timeout
Step 5.
The plug-in detects whether or not the board has the correct firmware loaded. The first time
you use the ADS1246EVM-PDK, the firmware for the MMB3 may need to be downloaded to
the MMB3. If the firmware must be loaded, you will see a screen similar to that shown in
.
Figure 12. Firmware Download Message Box
15
SBAU149B
–
June 2009
–
Revised May 2011
ADS1146EVM, ADS1246EVM, ADS1146EVM-PDK, ADS1246EVM-PDK
Copyright
©
2009
–
2011, Texas Instruments Incorporated
