2 Equipment
This hardware setup procedure is written with the intent to use the onboard CDC clocking option, and therefore
only requires an analog input for evaluation. Using an external sampling clock(s) is an option, and instructions
are provided toward the end of this document.
2.1 Evaluation Board Feature Identification Summary
Figure 2-1. ADC364xEVM Feature Identification
Ensure that jumper J8 is shunted in the 2-3 position. This allows 5 V to be supplied to the ADC364xEVM through
the mini-USB connector.
Equipment
SBAU232 – OCTOBER 2020
ADC364xEVM Evaluation Module
3
Copyright © 2020 Texas Instruments Incorporated