Required Equipment
7
SLAU776 – May 2018
Copyright © 2018, Texas Instruments Incorporated
Equipment
1.2
Required Equipment
The following equipment and documents are included in the EVM evaluation kit:
•
Evaluation board (EVM)
•
Mini-USB cable
•
Power cable
The following equipment is
not
included in the EVM evaluation kit, but is required for evaluation of this
product:
•
TSW14DL3200EVM data capture board and related items
•
HSDC Pro software
•
Computer (PC) running the Windows
®
operating system (XP, 7, 8, or 10)
•
One low-noise signal generator for analog input. TI recommends the following generators:
–
Keysight™ E8663D
–
Rohde & Schwarz
®
SMA100A or SMA100B
•
Bandpass filter for analog input signal (2482 MHz or desired frequency). The following filters are
recommended:
–
Bandpass filter (BPF):
•
Greater than or equal to 60-dB harmonic attenuation
•
Less than or equal to 5% bandwidth
•
Greater than 18-dBm power
•
Less than 5-dB insertion loss
–
Trilithic™ 5VH-series tunable BPF
–
K&L Microwave™ BT-series tunable BPF
–
TTE KC6 or KC7-series fixed BPF
•
Signal-path cables, SMA or BNC (or both SMA and BNC)
By default, the ADC12DL3200EVM has an onboard clocking solution. A few small board modifications
enable external clocking. If external clocking is used, the following additional equipment is recommended.
•
One low-noise signal generator. TI recommends models similar to the analog input source.
•
A bandpass filter for the DEVCLK input. TI recommends a filter similar to the analog-input path filter.
