4. Connect a USB cable between USB daughter board and the PC, see
USB Cable
JTAG Cable
Figure 6-3. JTAG and USB Cable Connections
5. Connect a USB cable between the ADC12DJ3200EVM (J31) and the PC. Connect the 5-V power supply that
can source a minimum of 3 A to J37 on the ADC12DJ3200EVM. TP12 (+5 V) and TP13 (GND) provide
another option for connecting to 5 V.
6. Connect a RF analog input source to J2 (VINA) of the ADC12DJ3200EVM. This guide uses a 70-MHz source
at 0 dBm from a TI TSW2700EVM.
7. Turn on the Alpha Data board. The power switch is near the power input cable.
Power Switch
Figure 6-4. Alpha Data Board Power Switch
Hardware Setup
SLAU833A – MAY 2020 – REVISED OCTOBER 2020
ADC12DJ3200EVMCVAL With Alpha Data Xilinx
®
Kintex Ultrascale Space
Development Kit
9
Copyright © 2020 Texas Instruments Incorporated