5. Go to the
Low Level View
tab.
6. In the
Block
box near the bottom of the page, click the drop-down arrow and select "ADC12DJxx00".
7. In the
Address
box enter "213”, in the
Write Data
box write “00”, then click the
Write Register
button.
8. Click the
Read Register
button to verify address 0x213 is now set to 0x00, as
Figure 7-2. Low Level View Tab
Alpha-Data ADC12DJ3200EVMCVAL Start-up Instructions
SLAU833A – MAY 2020 – REVISED OCTOBER 2020
ADC12DJ3200EVMCVAL With Alpha Data Xilinx
®
Kintex Ultrascale Space
Development Kit
13
Copyright © 2020 Texas Instruments Incorporated
