www.texas.dk
Side 10
5. Operation
-
Hose.
o
Draw extra attention to the hose not being overloaded during operation. You shall support it
so that it will not be damaged.
o
Only use hoses which fit in length. Too long hoses will prolong the transport time and wear the
pump.
-
Filter.
o
You should always use a filter on the take in of the hose. Thereby you ensure that no dirt is
being sucked into the pump and damaging it.
o
Inspect the filter before start.
o
Control the filter regularly during operation.
-
Impeller.
o
Due to large wear it may be necessary often to replace the impellar.
6. Storage
See the enclosed engine manual.
Empty the pump unit for water by loosening the drain plug. Thereby you prevent frost damage.
Bundprop
Drain plug
