15
10. Spark plug
PROCEDURE
-
Remove the sparking plug cover. (Caution, it may be hot, if the engine have been
running).
-
Brush off dirt from the spark plug.
-
Use a spark plug wrench to loosen the spark plug.
-
Inspect if the isolation is intact.
-
Clean the spark plug with a steel brush.
-
Measure the electrode distance, make sure not to damage the electrode.
-
The distance should be: 0,7 – 0,8 mm
-
If the sparking plug is okay, put it back in its place.
-
Put the sparking plug cover back in its place.
-
See fig 1, pos 1, page 2.
11. Fuelfilter
FUELFILTER
-
Remove the fuelfilter from the tank and fuelline.
-
Clean the filter and check that it is not broken anywhere, change if necessary.
Reinstall the filter and fuelline.
-
See fig 5, pos 1, page 3.
12. Sparkarrester
SPARKARRESTER
If the engine has been running it will be very hot, allow it to cool before proceding.
The sparkarrester must be serviced every 100 hours to maintain its efficiency.
It is important to be careful not to damage the sparkarrester.
See fig 6, page 3
Содержание TG370
Страница 2: ...2 Illustrationer Illustrations Fig 1 Fig 2 1 2 3 6 4 3 1 2 5 ...
Страница 3: ...3 Fig 3 Fig 4 Fig 5 Fig 6 1 2 3 4 1 ...
Страница 20: ...20 ...
