9
Changing the blades
To change the blades, first remove the cover.
1. Apply gentle pressure to the area marked on the cover (
1
).
2. Pull back the cover (
2
).
3. Change the blade. Be aware that the blade is held in place by the two plastic ridges at
the back (
3
).
4. Ensure that the blade is sits correctly in relation to the four pins (
4
).
5. Replace the cover. Check that the cover is secure.
Never hold the blades when changing blades. If the on-off switch is activated acci-
dentally the blade can be set in motion causing bodily harm.
Grass Blades
Hedge Blades
2
1
3
4
