12
W O R K I N G W I T H T H E H A N D Y S W E E P 6 0 0
The sweeper moves forward by quickly pushing down
the right lever. Fig 1
The sweeper moves backwards by quickly pulling the
right lever. Fig 2
The brushes are activated by quickly pushing down the
left lever. Fig 3
The sweeper is equipped with a dead man s handle, which means that when you release the levers, the
brush and machine stop.
In case of accidents you should release the levers as quick as possible and stop the engine.
Height adjustment of stabilising wheels and brushes:
Once the brushes get worn it is necessary to adjust the height of the brushes, i.e. how close they are to
the surface to sweep. This adjustment takes place by moving the plastic rings of the brush stabilising
wheels.
Dismount the stabilising wheels and remove one plastic ring from the bottom (illus. No. 1). Mount the
wheel again (illus. No. 2). This lifts up the stabilising wheel and the brushes will come closer to the
surface. Finally, mount the plastic ring, sleeve and locking ring (illus. No. 3).
No. 1
No. 2
No. 3
Swinging the brush:
The brush can be swung 20 degrees to either side.
Press the steering knuckle arm for the brush, turn the brush
and let go of the handle, so that the catch will fall correctly into place.
(Illus. No. 4)
No. 4
Find information about the engine in the Motor manual instruction
