Texas Equipment H 380, Руководство пользователя

Страница: 10 / 17

Starting up and how to use
The hedge trimmer is equipped with a two-hands safety switch. The machine only works
when both on/off switches are activated. If one of the switches is released the blade will
stop running.
Fasten the extension cable in the cable holder before use (5).
When the hedge trimmer is used in open air, you must always use extension cable
designed for this use.
Important work information
When a switch is released a short spark may appear from the engine.
This is not abnormal and should not lead to worries.
The spark is caused by the braking system that is build into the hedge trimmer.
Apart from hedges the hedge trimmer may also be used for cutting bushes.
The best cutting effect is achieved when holding the blade at an angle to the hedge of
approx. 15
° .
The opposite rotating knives cut on both sides, and it is therefore possible to trim the
hedge in both directions.
The sides of the hedge are trimmed using curve shaped movements from the bottom and
upwards.
Maintenance
• Turn off the power and pull out the plug before you clean and store the machine.
• For obtaining the best cutting results the knives must be cleaned and oiled regularly.
Remove dirt with a brush and oil lightly.
• Use biodegradable oil.
• Clean the housing and other parts with a mild cleanser and a moist cloth. Never use
aggressive cleansers or solvents.
• Prevent water from getting into the machine.
•
Use the blade protection when the machine is stored.
10